MEBAC Anti-Slip Plates
In areas of heavy foot traffic where liquid spills can cause a slipping hazard, IKG® supplies a safe, practical solution with its MEBAC® slip-resistant surface line of non-slip floor coatings.
MEBAC slip-resistant coated surfaces are available from IKG in various surface options for most standard size shapes and plates, including carbon steel, aluminum and stainless steel. They can be supplied for both new and existing facilities.
Standard size plates for floor coatings are furnished to standard mill tolerances on length, width and squareness. In installations where the plates will be laid side-by-side and tighter tolerances required to assure satisfactory fit-up, dimension tolerances should be specified.
MEBAC Anti-Slip Plates can be supplied in two ways. For existing facilities, areas prone to slipperiness due to grease, oil or other liquids can be retrofit with MEBAC Anti-Slip Plates. For new projects, MEBAC Anti-Slip Plates can be fabricated to spec for the area needed.
IKG recommends that a quality rust–inhibitive coating be applied after application to protect the MEBAC coated floor coatings on Mill Finished Steel from rusting if exposed to moisture. Our national sales office will be happy to provide details and assistance.
Click on the links below to learn what MEBAC Anti-Slip Plates and Floor Coatings can bring to your business.
Features
- Available in various surface options for most commercially available standard size plates
- Consistently high Coefficient of Friction under a wide range of conditions
- Provides margins of safety unmatched in the industry
- Listed as slip resistant by Underwriters Laboratories
Advantages
- Durable
- Versatile
- Economical due to its long life cycle
- Low maintenance
- Apply once, it provides slip resistance for years
Materials Available
Carbon Steel Plates
- Thickness: 1/8-in. through 1-in.
- Maximum width: 60 in.
- Maximum length: 240 in.
- Available with Steel MEBAC # 1, #3, or #4 surface
- Available with Aluminum MEBAC #1, #4, or E-Z Weld surface
Aluminum Plate (Specify alloy required)
- Thickness: ¼-in. through 1-in.
- Maximum width: 60 in.
- Maximum length: 240 in.
- Available with Aluminum MEBAC #1, #4, or E-Z Weld surface
Stainless Steel Plate (Specify alloy required)
- Thickness: ¼-in. through ½-in.
- Maximum width: 60 in.
- Maximum length: 240 in.
- Available with Aluminum MEBAC #4 surface
- Available with Stainless Steel MEBAC #4 surface
Considerations
Sizes
Standard size plates are furnished with mill tolerances in length, width and squareness.
Tolerances
Dimension tolerances should be specified for installations where the plates will be laid side-by-side and tighter tolerances required to assure satisfactory fit-up.
Galvanizing
When hot-dipped galvanizing, MEBAC Galvanizing Guidelines should be followed.
Surface Options/Finishes
Mill Finish Carbon Steel MEBAC will rust readily if exposed to moisture. Care must be taken during transit and storage to protect from moisture. IKG recommends a quality rust inhibitive coating be applied after application of Mill Finished Carbon Steel MEBAC to protect the surface from rusting.
